Polished Concrete Sealer - Cream Finish

Posted by Jason Mustukas on 01-Aug-2017 14:39:25

Cream finish, polished concrete is a very inexpensive process compared to a full stone exposure and high gloss finished polished concrete.


Specifications for Polished Concrete Mix

  • Minimum 32 Mpa Concrete
  • Preferably use a topping slab on top of the structural slab, if using expensive colours and stone blends from concrete companies this will save you heaps
  • Vibrate well and evenly always
  • Helicopter the surface well to compact cement and fines, this is called burnishing
  • Make sure you have a very experienced concreter finishing your surface
  • Densify the surface as soon as possible, I use a potassium silicate densifiers from Con-treat

Preparation for Polished Concrete Sealer

  • Diamond grind or burnish to a 200 grit finish with out breaking through the surface to stone
  • Vacuum all dust from the floor
  • Wet the surface and wipe clean with wet micro fibre flat mops

Polished Concrete Sealing with Pro Seal 896

  • Spray apply Pro Seal 896 at 4 parts water to 1 part concentrate
  • Using a micro fibre flat mop, spread the Pro Seal 896 evenly over the floor and then cross wipe to be sure you have an even coat
  • Repeat a second coat in approx 2 hours
  • For higher gloss finishes, high speed burnish with a hog hair style buffing pad with in 24 hours, usually do the next day after sealing the concrete.

Get in Touch


Topics: Polished Concrete, concrete sealer

Mixing & Applying Pro Seal 896

New WBS Pro Seal 896 users, please complete the 'Basic Mixing' & 'How to Apply' course below.

How to Mix & Apply Pro Seal 896

FREE Pro Seal 896 trade sealing demo on the job.

Same day lay and spray, Pro Seal 896 on Exposed Aggregate

Do you live & work on the Gold Coast, Brisbane, Sunshine Coast, Northern Rivers NSW, Perth

Schedule My Free Sealing Demo

On the Job - Certified Applicator Training

WBS is committed to training on the effective uses for Pro Seal 896 and other products we have in our range. Becoming certified is re assurance for the customer, all work is being completed as per WBS protocol.


Subscribe to Email Updates